The Basics of RF Modelling with COMSOL in 18 Minutes

Written by: COMSOL | Published: 07/17

Date: 25th July, Time: 4:30PM BST

If you're interested in learning the basics of RF and microwave device modelling, then tune into this 18-minute webinar.

In this presentation, you will get a demonstration in the COMSOL Multiphysics software on how to set up a model by choosing physics, proper boundary conditions, and material properties and then solving and postprocessing a microstrip line and a printed dipole antenna. We will also show how the model can be extended to simulate more advanced devices, including several physics affecting your design.